El Paso – Stanton (Lerdo, SENTRI)
Ciudad Juárez
Passenger vehicles
- StandardClosed
- SENTRI3 min
Ciudad Juárez
Now: passenger vehicles SENTRI: 3 min. Source: CBP, checked at 5:39 p.m. (Tijuana time) on Sunday, November 8, 2026.
Ciudad Juárez
Live
Statistics
We are collecting data. We save every CBP report to calculate the average wait by hour and day. So far we have 4 of the 24 readings needed for Cars · SENTRI.
In the meantime, see the best times to cross guide.
The El Paso – Stanton (Lerdo, SENTRI) border crossing is a U.S. land port of entry operated by U.S. Customs and Border Protection, on the border between Ciudad Juárez, Chihuahua and El Paso, Texas. Here you can see the estimated wait time to enter the U.S. in each lane and the number of open lanes, according to the latest CBP report.
CBP measures the delay from the moment you reach the end of the line until the inspection booth. If the report is more than an hour old, take it with caution: the line may have changed.
See also all the Ciudad Juárez border crossings, the El Paso side and today's exchange rate.
Approximate location: El Paso, Texas, United States (31.762, -106.485).
| Crossing | Car standard | Car Ready | SENTRI | Pedestrian standard | Pedestrian Ready |
|---|---|---|---|---|---|
| El Paso | Pending | Pending | Pending | Pending | Pending |
| El Paso – Bridge of the Americas (BOTA) | 1 h 28 min | 1 h 25 min | — | 20 min | Closed |
| El Paso – Paso del Norte (PDN) | 1 h 15 min | 1 h 10 min | 5 min | 45 min | 35 min |
| El Paso – Ysleta (Zaragoza) | Closed | 1 h | 10 min | 10 min | — |
| Santa Teresa – Santa Teresa Port of Entry | 1 h 05 min | 1 h | — | 5 min | — |
| Fort Hancock | 5 min | Closed | Closed | No wait | Closed |
Latest CBP report: passenger vehicles SENTRI: 3 min. This page refreshes automatically every 5 minutes.
CBP publishes these hours: 6 am-Midnight. SENTRI and Ready Lane lanes may have different hours.
If you have SENTRI, use it: it is usually the fastest. With a Border Crossing Card (laser visa) or a passport with a chip you can use Ready Lane. If your document has no chip, use the Standard lane. More details in the SENTRI and Ready Lane guide.